State Online Standby
Temperature 58 degrees C / 136 degrees F
Power:
3.3 V 3317 mV
5.0 V 5006 mV
12.0 V 11843 mV
5.0 V bias 4998 mV
8.0 V bias 8195 mV
BUS Revision 12
FPGA Revision 255
Meaning The show chassis environment mcs command is available on the M40e and M160 routers
only. The command output displays environmental information about both MCSs installed
in the router or about an individual MCS. It displays the MCS status: Present, Online,
Offline, or Empty. The command also indicates whether the MCS is master. The command
output displays the temperature of the air flowing past the MCS, information about MCS
power supplies, field programmable gate array (FPGA) revision information, and the
revision level of the chassis management bus (CMB) backup.
Related
Documentation
• Checklist for Monitoring the MCS on page 455
• Host Module Overview on page 435
Copyright © 2012, Juniper Networks, Inc.440
M Series and T Series Routers Monitoring and Troubleshooting Guide
To Next Page
Loading...
