Fan Tray 4 Fan 1 OK Spinning at normal speed
Fan Tray 4 Fan 2 OK Spinning at normal speed
Fan Tray 4 Fan 3 OK Spinning at normal speed
Fan Tray 4 Fan 4 OK Spinning at normal speed
Fan Tray 4 Fan 5 OK Spinning at normal speed
Fan Tray 4 Fan 6 OK Spinning at normal speed
Fan Tray 4 Fan 7 OK Spinning at normal speed
Fan Tray 4 Fan 8 OK Spinning at normal speed
Fan Tray 4 Fan 9 OK Spinning at normal speed
Fan Tray 5 Fan 1 OK Spinning at normal speed
Fan Tray 5 Fan 2 OK Spinning at normal speed
Fan Tray 5 Fan 3 OK Spinning at normal speed
Fan Tray 5 Fan 4 OK Spinning at normal speed
Fan Tray 5 Fan 5 OK Spinning at normal speed
Fan Tray 5 Fan 6 OK Spinning at normal speed
Fan Tray 5 Fan 7 OK Spinning at normal speed
Fan Tray 5 Fan 8 OK Spinning at normal speed
Fan Tray 5 Fan 9 OK Spinning at normal speed
Meaning The command output shows the fans, impellers, or blowers monitored for the router
type. The command output displays the fan, impeller, or blower status and the spinning
speed. The status can be OK, Testing (during initial power-on), Failed, or Absent.
Measurement indicates if the fan or impeller is spinning at normal or high speed.
Related
Documentation
• Checklist for Monitoring Redundant Cooling System Components on page 623
647Copyright © 2012, Juniper Networks, Inc.
Chapter 31: Monitoring Redundant Cooling System Components
To Next Page
Loading...
