3-20 Options Service Manual
4024-XXX
Configuration menu (CONFIG MENU)
Entering Configuration Menu
1. Turn off the printer.
2. Press and hold and .
3. Turn on the printer.
4. Release the buttons when Performing Self Test displays.
The message CONFIG MENU displays on the top line of the operator panel.
Available menus
Configuration Menu
Maint Cnt Value See “Maintenance page count (Maint Cnt Value)” on page 3-21
Reset Maint Cnt See “Maintenance page counter reset (Reset Maint Cnt)” on page 3-21
REGISTRATION “REGISTRATION” on page 3-22
Top Margin
See “Top Margin” on page 3-22
Tray 1 Left Mar See “Tray 1–5 Left Margin” on page 3-22
Tray 2 Left Mar
Tray 3 Left Mar (if installed)
Tray 4 Left Mar (if installed)
Tray 5 Left Mar (if installed)
Quick Test
See “Quick Test” on page 3-23
Prt Quality Pgs See “Print quality pages (Prt Quality Pgs)” on page 3-23
SIZE SENSING See “SIZE SENSING” on page 3-24
Tray 1 Sensing
Tray 2 Sensing
Tray 3 Sensing (if installed)
Tray 4 Sensing (if installed)
Tray 5 Sensing (if installed)
Statement/A5 See “Statement/A5” on page 3-24
Executive/B5 See “Executive/B5” on page 3-24
Panel Menus See “Panel Menus” on page 3-24
PPDS Emulation See “PPDS Emulation” on page 3-25
Demo Mode See “Demo Mode” on page 3-25
Factory Defaults See “Factory Defaults” on page 3-25
Energy Conserve See “Energy Conserve” on page 3-25
EVENT LOG (print log only) See “EVENT LOG” on page 3-25
Paper Prompts See “Paper Prompts” on page 3-25
Env Prompts See “Env Prompts” on page 3-26
Jobs On Disk (if hard disk is
installed)
See “Jobs On Disk” on page 3-26
Disk Encryption (only if hard disk
is installed and feature is set up)
See “Disk Encryption” on page 3-26
Font Sharpening See “Font Sharpening” on page 3-26
Short-edge Printing See “Short Edge Printing” on page 3-26
To Next Page
Loading...
