Lexmark W840 - 500-Sheet Drawer (2 TM)-Separation Roll One-Way Friction Clutch Removal

Repair information 4-31
4024-XXX
2X 500-sheet drawer (2TM)—separation roll one-way friction clutch removal
1. Remove the media tray assembly.
2. Remove the separation roll. See “2X 500-sheet drawer (2TM)—separation roll removal” on page 4-32.
3. Remove the separation roll spacer (A) from the shaft (B).
4. Remove the separation roll one-way friction clutch (C).
Front
A
C
B