Lexmark W840 - 500-Sheet Drawer (2 TM)-Feed Roll Removal

4-28 Options Service Manual
4024-XXX
2X 500-sheet drawer (2TM)—feed roll removal
1. Remove the media tray assembly.
2. Move the feed unit front guide (A) in the direction of the arrow.
3. Release the hook securing the feed roll (B) to the shaft (C).
4. Remove the feed roll (B).
Note: Do not touch the rubber surface of the feed roll (B).
Note: Before re-installing, do not touch the rubber surface of the feed roll (B).
Front
A
Hook
C
B