Lexmark W840 - Exit 2 Unit Docking Lever Removal

Repair information 4-193
4024-XXX
Exit 2 unit docking lever removal
1. Remove the exit 2 unit assembly. See “Exit 2 unit assembly removal” on page 4-192.
2. Remove the two exit 2 unit docking levers (A) with a prying tool from the brackets (B).
Note: When removing the two exit 2 docking levers, ensure the brackets (B) are not bent or deformed.
3. Remove the springs (C) from the brackets (B).
Front
A
C
B
ACB
Rear