Lexmark W840 - 500-Sheet Drawer (2 TM)-Tray Lift One-Way Gear Clutch Assembly Removal

Repair information 4-19
4024-XXX
2X 500-sheet drawer (2TM)—tray lift one-way gear clutch assembly removal
1. Remove the media feed unit assembly. See “2X 500-sheet drawer (2TM)—media feed unit assembly
removal (tray 3)” on page 4-9 or “2X 500-sheet drawer (2TM)—media feed unit assembly removal
(tray 4)” on page 4-11.
2. Remove the harness from the bracket (A).
3. Remove the three screws securing the bracket (A) to the media feed unit assembly.
4. Remove the bracket (A).
Note: The gears may become detached from the bracket (A).
5. Remove the tray lift one-way clutch (B).
Harness
Washer
Clamp
A
Rear
B