Lexmark W840 - 500-Sheet Drawer (2 TM)-Tray Lift Gear Group Removal

4-16 Options Service Manual
4024-XXX
2X 500-sheet drawer (2TM)—tray lift gear group removal
1. Remove the media tray from the machine.
2. Remove the two screws securing bracket (A).
3. Remove the tray lift sector gear 12 tooth (B).
4. Remove the tray lift gear 13 tooth (C) from bracket (A).
5. Remove the tray lift gear 13/60 tooth (D) from bracket (A).
Note: Extra force is required to pull the tray lift gear 13 tooth (C) and the tray lift gear 13/60 tooth (D) from
bracket (A).
C
Rear
A
B