Lexmark W840 - Exit 2 Media Shift Gear Removal

4-204 Options Service Manual
4024-XXX
Exit 2 media shift gear removal
1. Remove the exit 2 unit assembly. See “Exit 2 unit assembly removal” on page 4-192.
2. Open the exit 2 unit assembly.
3. Remove the exit 2 left cover. See “Exit 2 left cover removal” on page 4-197.
4. Remove the exit 2 right cover. See “Exit 2 right cover removal” on page 4-198.
5. Move the roll assembly (A) fully to the right (front).
6. Lift the exit 2 media shift gear (B) upward to release it from the exit 2 unit assembly.
7. Release the hook on the exit 2 media shift gear (B) from the hole in the roll assembly (A).
8. Remove the exit 2 media shift gear (B).
B
A
HOOK
HOLE
A
Front
B
A