Lexmark W840 - 500-Sheet Drawer (2 TM)-Sensor (Pre-Feed) Removal

Repair information 4-25
4024-XXX
2X 500-sheet drawer (2TM)—sensor (pre-feed) removal
1. Remove the media feed unit assembly. See “2X 500-sheet drawer (2TM)—media feed unit assembly
removal (tray 3)” on page 4-9 or “2X 500-sheet drawer (2TM)—media feed unit assembly removal
(tray 4)” on page 4-11.
2. Remove the sensor (pre-feed) (A) from the feed unit front guide (B).
3. Disconnect the connector from the sensor (pre-feed) (A).
Front
A
B
Hook