Lexmark W840 - 2000-Sheet Dual Input (TTM)-Tray Support Roll Removal

Repair information 4-53
4024-XXX
2000-sheet dual input (TTM)—tray support roll removal
1. Remove tray 3 assembly. See “2000-sheet dual input (TTM)—tray 3 assembly removal” on page 4-56.
2. Remove tray 4 assembly. See “2000-sheet dual input (TTM)—tray 4 assembly removal” on page 4-55.
3. Remove the foot cover. See “2000-sheet dual input (TTM)—foot cover removal” on page 4-48.
4. Remove two screws securing the two brackets (A).
5. Remove the two e-clips securing the tray support rolls (B) to the two brackets (A) using a prying tool.
6. Remove the two e-clips securing the tray support rolls (B) to the main frame.