4-132 Options Service Manual
4024-XXX
HCF media feed unit assembly removal
1. Remove the HCF media tray assembly from the printer. See “HCF media tray assembly removal” on
page 4-127.
2. Remove the two screws securing the media feed unit assembly (A) on the front side.
3. Pull the media feed unit assembly (A) out of the machine in the direction of the arrow.
Note: More force to remove the media feed unit (A) may be required due to the electrical connector inside
the machine.
HCF feed lift motor removal
1. Remove the HCF media tray assembly. See “HCF media tray assembly removal” on page 4-127.
2. Remove the HCF media feed unit assembly. See “HCF media feed unit assembly removal” on
page 4-132.
3. Disconnect the connector from the HCF feed lift motor assembly (A).
4. Remove the four screws securing the HCF feed lift motor (A) to the HCF media feed unit assembly (B).
5. Remove the HCF media feed lift motor (A).
To Next Page
Loading...
