Lexmark W840 - 2000-Sheet Dual Input (TTM)-2 TM;TTM Controller Card Assembly Removal

4-116 Options Service Manual
4024-XXX
2000-sheet dual input (TTM)—2TM/TTM controller card assembly removal
1. Remove the rear cover. See “2000-sheet dual input (TTM)—rear cover removal” on page 4-51.
2. Disconnect all the connectors from the 2TM/TTM controller card assembly (A).
3. Remove four screws securing the 2TM/TTM controller card assembly (A).
Connector
Connectors
DIP switch
Connectors
A