Lexmark W840 - HCF Sensor (Media Out) Removal

4-140 Options Service Manual
4024-XXX
HCF sensor (media out) removal
1. Open the HCF top door.
2. Open the HCF feed unit assembly.
3. Remove the connector from the sensor (HCF media out) (A).
4. Release the hooks securing the sensor (HCF media out) (A) to the HCF feed unit assembly (B).
5. Remove the sensor (HCF media out) (A).
Note: The sensor (HCF media out) (A) may be easier to replace if the upper guide (C) is removed to
provide access.
A
B
Connector
C
Front