Lexmark W840 - HCF Top Door Assembly Removal

4-146 Options Service Manual
4024-XXX
HCF top door assembly removal
1. Remove the HCF unit from the printer.
2. Remove the HCF top cover. See “HCF top cover removal” on page 4-119.
3. Remove the HCF rear cover. See “HCF rear cover removal” on page 4-124.
4. Open the HCF top door assembly.
5. Remove the two screws securing the bracket (A) to the frame assembly (B).
6. Remove the bracket (A).
Note: When removing the bracket (A), leave the shaft (C) and the HCF top door spring R (D) attached to
the top door assembly.
A
Rear view
E
D
E
F
Slot
D-shaped hole
D-shaft
C
B
F
A