Lexmark W840 - 2000-Sheet Dual Input (TTM)-Tray 3 Mylar Actuator Removal

4-66 Options Service Manual
4024-XXX
2000-sheet dual input (TTM)—tray 3 mylar actuator removal
1. Remove the tray 3 assembly. See “2000-sheet dual input (TTM)—tray 3 assembly removal” on
page 4-56.
2. Remove the tray 3 front cover. See “2000-sheet dual input (TTM)—tray 3 front cover removal” on
page 4-57.
3. Remove the tray 3 rear cable assembly. See “2000-sheet dual input (TTM)—tray 3 rear cable assembly
removal” on page 4-58.
4. Remove the tray 3 front cable assembly. See “2000-sheet dual input (TTM)—tray 3 front cable
assembly removal” on page 4-61.
5. Remove the media guide rack and pinion. See “2000-sheet dual input (TTM)—media guide rack and
pinion removal” on page 4-62.
6. Move both media guides fully inward.
7. Lift the front edge of the bottom plate (A) from the tray.