Lexmark W840 - Exit 2 bin Full Actuator Removal

4-200 Options Service Manual
4024-XXX
Exit 2 bin full actuator removal
1. Remove the exit 2 unit assembly. See “Exit 2 unit assembly removal” on page 4-192.
2. Open the exit 2 unit assembly (A).
3. Remove the exit 2 left cover. See “Exit 2 left cover removal” on page 4-197.
4. Remove the exit 2 right cover. See “Exit 2 right cover removal” on page 4-198.
5. Remove the bin full outer actuator (A) from the spring (B).
6. Release the hooks securing the bin full inner actuator (C) to the right cover (D).
7. Release the spring (B) from the hook of the bin full inner actuator (C).
D
Hook
Hook
Hook
D
A
Slot
C
B
Rear
Square hole
Hook