Lexmark W840 - 500-Sheet Drawer (2 TM)-Drive Motor Assembly Removal

Repair information 4-45
4024-XXX
2X 500-sheet drawer (2TM)—drive motor assembly removal
1. Remove the rear cover. See “2X 500-sheet drawer (2TM)—rear cover removal” on page 4-5.
2. Disconnect the connector harness from the 2TM/TTM drive motor assembly (A).
3. Remove two screws securing the 2TM/TTM drive motor assembly (A) to the machine.
4. Remove the 2TM/TTM drive motor assembly (A).
A
Rear