Lexmark W840 - 500-Sheet Drawer (2 TM)-Sensor (Tray 4 Feed-Out) Removal

4-38 Options Service Manual
4024-XXX
2X 500-sheet drawer (2TM)—sensor (tray 4 feed-out) removal
1. Open the 2TM/TTM left door assembly.
2. Remove the screw securing the 2TM/TTM left door support strap (A).
3. Remove the two screws securing the lower bracket (B).
4. Disconnect the connector from the sensor (tray 4 feed-out) (C).
5. Release the hooks securing the sensor (tray 3 feed-out) (C) to the lower bracket (B).
6. Remove the sensor (tray 3 feed-out) (C).
Hooks
Left
A
C
C
B
Bottom view
Connector
Connector