Lexmark W840 - 2000-Sheet Dual Input (TTM)-Tray 4 Assembly Removal

Repair information 4-55
4024-XXX
2000-sheet dual input (TTM)—tray 4 assembly removal
1. Pull out the tray 4 assembly.
2. Remove two screws securing the tray 4 transport assembly (A).
3. Push the tray 4 transport assembly (A) into the machine in the direction of the arrow.
4. Remove two screws securing the tray 4 stopper (B) to the lower part of tray 4 assembly (C).
5. Remove the tray 4 stopper (B).
6. Remove the tray 4 assembly (C).
A
D
C
B