Lexmark W840 - 500-Sheet Drawer (2 TM)-Sensor (Tray 3 Feed-Out) Removal

Repair information 4-37
4024-XXX
2X 500-sheet drawer (2TM)—sensor (tray 3 feed-out) removal
1. Open the 2TM/TTM left door assembly.
2. Remove the two screws securing the upper bracket (A).
3. Disconnect the connector from the sensor (tray 3 feed-out) (B).
4. Release the hooks securing the sensor (tray 3 feed-out) (B) to the upper bracket (A).
5. Remove the sensor (tray 3 feed-out) (B).
A
B
Connector
Bottom view
Left
Hooks
B