3-4 Options Service Manual
4024-XXX
Exiting Diagnostics mode
Select Exit Diagnostics to exit the Diagnostics mode. Resetting the Printer displays, the printer performs a
POR, and returns to normal mode.
Par S Strobe Adj See “Parallel strobe adjustment (Par x Strobe Adj)” on page 3-18
Par x Strobe Adj (if additional
parallel options are installed)
EVENT LOG
Display Log See “Display Log” on page 3-18
Print Log See “Print Log” on page 3-18
Clear Log See “Clear Log” on page 3-19
EXIT DIAGNOSTICS
Diagnostics mode tests (continued)
To Next Page
Loading...
