Lexmark W840 - 2000-Sheet Dual Input (TTM)-Tray 3 Assembly Removal

4-56 Options Service Manual
4024-XXX
2000-sheet dual input (TTM)—tray 3 assembly removal
1. Remove the left cover. See “2000-sheet dual input (TTM)—left cover removal” on page 4-50.
2. Open the 2TM/TTM left door assembly.
3. Loosen the screw securing the tray 3 stopper (A).
4. Move the tray 3 stopper (A) outward in the direction of the arrow while pulling out the tray 3 assembly (B).
5. Remove the tray 3 assembly (B).
A
Front
B
Screw