General information 1-37
4024-XXX
Media shift motor
The media shift motor is a stepping motor moving the media exit roll assembly frontward or rearward. Forward
rotation of this motor moves the media exit roll assembly to the front side. Reverse rotation of this motor moves
it to the rear side.
Exit interface card assembly (located in the printer)
The exit interface card assembly contains a CPU and controls media feed in the exit 2 upon receiving a
command from the printer engine card assembly and sensor/switch information.
Exit 2 left door assembly
The left door assembly detects open/close of the exit 2.
Sensor (exit 2)
The sensor (exit 2) detects whether media is remaining in the exit 2.
Sensor (Standard bin full exit 2)
The sensor (exit 2 standard bin full) detects whether the standard bin is full.
Sensor (exit 2 media shift HP)
The sensor (exit 2 media shift HP) detects the media exit roll assembly position.
Exit 2 transport roll assembly and media exit roll assembly
The exit 2 transport roll assembly and exit 2 media exit roll assembly are rollers used to eject media to the exit 2
standard bin or to feed media to the optional duplex.
To Next Page
Loading...
