Lexmark W840 - 2000-Sheet Dual Input (TTM)-Sensor (Pre-Feed) Removal

4-98 Options Service Manual
4024-XXX
2000-sheet dual input (TTM)—sensor (pre-feed) removal
1. Remove the media feed unit assembly. See “2000-sheet dual input (TTM)—media feed unit assembly
removal (tray 3)” on page 4-85 or “2000-sheet dual input (TTM)—media feed unit assembly removal
(tray 4)” on page 4-80.
2. Remove the sensor (pre-feed) (A) from the feed unit front guide (B).
3. Disconnect the connector from the sensor (pre-feed) (A).
Front
A
B
Hook