Lexmark W840 - HCF Media Long Edge Guide Assembly Removal

4-126 Options Service Manual
4024-XXX
HCF media long edge guide assembly removal
1. Pull out the HCF media tray.
2. Remove the e-clip securing the media long edge guide assembly (A) to the HCF media tray.
3. Lift the media long edge guide assembly (A) upward to release it from the hinges on the HCF media tray.
4. Remove the media long edge guide assembly (A).
Note: With the media long edge guide assembly (A) removed, the wave washer (B) becomes detached.
E-ring
B
A