4-122 Options Service Manual
4024-XXX
HCF sensor (HCF media size) removal
Note: This procedure can be applied to HCF sensor (media size L) and the HCF sensor (media size R).
1. Remove the HCF media tray. See “HCF media tray assembly removal” on page 4-127.
2. Remove the HCF top cover. See “HCF top cover removal” on page 4-119.
3. Remove the HCF rear cover. See “HCF rear cover removal” on page 4-124.
4. Disconnect the connector from the sensor (HCF media size R) (A) or the sensor (HCF media size L) (B).
5. Release the hooks securing the sensor (HCF media size R) (A) or the sensor (HCF media size L) (B) to the
unit.
6. Remove the sensor (HCF media size R) (A) or the sensor (HCF media size L) (B).
To Next Page
Loading...
