Lexmark W840 - HCF Media Transport Motor Assembly Removal

4-150 Options Service Manual
4024-XXX
HCF media transport motor assembly removal
1. Remove the HCF unit from the printer.
2. Remove the HCF rear cover. See “HCF rear cover removal” on page 4-124.
3. Disconnect the connector from the HCF transport motor (A).
4. Release the harness from the clamp.
5. Remove the three screws securing the HCF transport motor (A) to the unit.
6. Remove the HCF transport motor (A).
Harness clamp
Connector
A