Parts catalog 7-29
4024-XXX
Assembly 14: 2000-sheet dual input (TTM)—drive and electrical
Asm-
Index
Part
number
Units/
option
Units/
FRU
Description
14—1 40X0736 1 8 TTM drive gear kit includes:
• TTM drive gear 22/40T
• TTM drive gear 37T (2)
• TTM drive gear 32T
• TTM drive gear 60T (2)
• TTM drive gear 60T
• TTM drive gear bracket assembly
2 40X0734 1 1 Tray 3 lift gear assembly
3 40X0699 1 6 2TM/TTM clutch kit includes:
• 2TM/TTM clutch assembly
•Shaft
• Bushing 8 mm
• Clutch gear 38T
• Bushing 8 mm
• Washer
Warning: When replacing the 2TM/TTM drive motor, the serial number must be verified inside the option drawer.
4 40X0700 1 1 2TM/TTM drive motor
1. Remove the media tray 2.
2. Fully open the media trays 3 and 4.
3. Verify the first two digits on the serial number label.
4. If the first two digits are “20”, then order this FRU.
4 40X3664 1 1 2TM/TTM drive motor
1. Remove the media tray 2.
2. Fully open the media trays 3 and 4.
3. Verify the first two digits on the serial number label.
4. If the first two digits are “87”, then order this FRU.
5 40X0735 1 1 Tray 4 lift gear assembly
Warning: When replacing the TTM main cable, the serial number must be verified inside the option drawer.
6 40X0737 1 1 TTM main cable assembly
1. Remove the media tray 2.
2. Fully open the media trays 3 and 4.
3. Verify the first two digits on the serial number label.
4. If the first two digits are “20”, then order this FRU.
6 40X3666 1 1 TTM main cable assembly
1. Remove the media tray 2.
2. Fully open the media trays 3 and 4.
3. Verify the first two digits on the serial number label.
4. If the first two digits are “87”, then order this FRU.
7 40X2735 1 1 2TM/TTM controller card assembly
To Next Page
Loading...
