OKI Data Infotech Corporation CONFIDENTIAL
Chapter 3 Maintenance Mode Functions and Operations
3-61
Select a digit to modify with the Right and Left buttons, and modify the digit's value with the Up
and Down buttons.
After the value has been modified, press the OK button.
Press the CANCEL button to return to the previous screen without modifying the value.
(6) CAP POS ADJ VALUE
This menu is used to adjust the cap position.
Select CAP POS ADJ VALUE with the Up and Down buttons, and then press the OK button.
Select ±X.X ±Y.Ymm with the Up and Down buttons, and then press the OK button.
±XX. X : Current value
±YY. Y : Value after change
Setting range: -5.0 to +5.0
Select a digit to modify with the Right and Left buttons, and modify the digit's value with the Up
and Down buttons.
After the value has been modified, press the OK button.
Press the CANCEL button to return to the previous screen without modifying the value.
>>CAP POS ADJ VALUE
±X.X ±Y.Ymm ◎
>MECHANICAL ADJUST
CAP POS ADJ VALUE ◎
To Next Page
Loading...
