Oki IP-6620 - Page 102

OKI Data Infotech Corporation CONFIDENTIAL
Chapter 3 Maintenance Mode Functions and Operations
3-62
(7) WIPING POS ADJUST
See 7.5 Wiping Position Adjustment.
(8) RMNG INK SNSOR ADJ (LCIS)
This menu is used to enter adjustment values for the remaining ink sensors and to adjust the
sensors.
Initial adjustment
Select RMNG INK SNSOR ADJ with the Up and Down buttons, and then press the OK button.
Select INITIAL ADJUST with the Up and Down buttons, and then press the OK button.
CC: Ink color
X.XX: Adjustment value A
Y.YY: Adjustment value B
Select an ink color with the Up and Down buttons, and then press the OK button.
CC: Ink color
X.XX: Adjustment value A
Y.YY: Adjustment value B
Select a digit to modify with the Right and Left buttons, and modify the digit's value with the Up
and Down buttons.
* A ◎ symbol is displayed on the panel bottom right after you have modified the value.
After entering the values for both A and B, press the OK button.
The values for A and B are verified after you have pressed the OK button.
>>> INITIAL ADJUST CC
↕ A: X.XX B: Y.YY ◎
>>RMNG INK SNSOR ADJ
↕ INITIAL ADJUST ◎
>>> INITIAL ADJUST
↕ CC A: X.XX B: Y.YY ◎