Oki IP-6620 - Page 103

OKI Data Infotech Corporation CONFIDENTIAL
Chapter 3 Maintenance Mode Functions and Operations
3-63
(When the entered values are correct)
The ◎ symbol disappears.
To adjust other colors, press the CANCEL button and return to the color selection menu.
Select another ink color with the Up and Down buttons, and then press the OK button.
(If the entered values are not correct)
The buzzer sounds and the ◎ symbol does not disappear.
Post-replacement adjustment
Select RMNG INK SNSOR ADJ with the Up and Down buttons, and then press the OK button.
Select POST-REPLAC ADJ with the Up and Down buttons, and then press the OK button.
CC: Ink color
Select the color whose remaining ink sensor has been replaced, and then press the OK button.
Press the OK button to adjust the sensor, or the CANCEL button to interrupt the adjustment.
>>>POST-REPLAC ADJ
OK? ◎
>>>POST-REPLAC ADJ
↕ CC A: X.XX B: Y.YY ◎
>>RMNG INK SNSOR ADJ
↕ INITIAL ADJUST ◎
↕ ショキチョウセイ ◎
>>RMNG INK SNSOR ADJ
↕ POST-REPLAC ADJ ◎
>>> INITIAL ADJUST CC
↕ A: X.XX B: Y.YY ◎
>>> INITIAL ADJUST
↕ CC A: X.XX B: Y.YY ◎
>>> INITIAL ADJUST CC
↕ A: X.XX B: Y.YY