OKI Data Infotech Corporation CONFIDENTIAL
Chapter 7 Adjustment
7-18
<Procedure>
1. Press the ADJUST button.
2. With the Up and Down buttons, select
MECHANICAL ADJUST.
3. Press the OK button.
4. With the Up and Down buttons, select
WIPING POS ADJUST, then press the
OK button.
5. With the Up and Down buttons, select
ADJUST WIPER UNIT, then press the
OK button.
6. Press the OK button.
The carriage moves to the wiping
position and stops with the third wiper
blade turned upward.
ADJUST
MECHANICAL ADJUST ◎
>MECHANICAL ADJUST
PH POSITION ADJUST ◎
>MECHANICAL ADJUST
WIPING POS ADJUST ◎
>> WIPING POS ADJUST
ADJUST WIPER UNIT ◎
>>>ADJUST WIPER UNIT
OK? ◎
CARRIAGE IS MOVING
PLEASE WAIT
INSTALL THE WIPING
POS ADJUST PIN ◎
To Next Page
Loading...
