"RemoteConnect Support" Settings
SM 2-57 D0CA/D0C9/D0C8/D0CB
2.9.3 UNINSTALLING REMOTECONNECT SUPPORT
Some customers might ask for this feature to be disabled because of security precautions. In
many cases, disabling RemoteConnect Support should be sufficient.
However, if a customer asks for RemoteConnect Support to be completely uninstalled, remove
it by conducting the following procedure:
1. Log in to Screen SP mode.
2. Select Apps > Install.
3. Select Uninstall for the following two applications:
Firmware Type Part Number Version
RemoteConnectSupport D2411470A 1.0.5
RemoteSupportService D1961459A 1.0.1
To Next Page
Loading...
