UP/SP Data Import/Export
D0CA/D0C9/D0C8/D0CB 5-62 SM
Importing Device Information
This can be exported / imported by an administrator with all privileges.
Import device information saved on an SD card.
1. With the Copy/Printer/Scanner/Fax/Settings screen open, insert an SD card into the media
slot on the side of the operation panel.
2. Log in from the operation panel as an administrator with all privileges.
3. Press [Settings] on the Home screen > [System Settings].
4. Press [Settings for Administrator] > [Data Management] > [Device Setting Information:
Import (Memory Storage Device)].
5. Configure the import conditions.
• Press [Select File] of the "Device Setting Information File" to select the file(s) to import.
• Specify whether to [Include] or [Exclude] the "Device Unique Information". "Device
Unique Information" includes the IP address, host name, fax number, etc.
• Press [Change], enter the encryption key that was specified when the file was
exported, and press [OK].
6. Press [Run Import].
7. Press [OK].
8. Press [Exit].
The machine restarts.
• If data export/import fails, the details of the error can be viewed in the log.
To Next Page
Loading...
