Ricoh IM C400F

Scanner Service Mode
D0CA/D0C9/D0C8/D0CB 3-436 SM Appendices
outside of the
machine
accessing is allowed from outside of
FlairAPI such as PC, Remote UI,
IT-Box etc…
bit 2 IPv6 (Exclusive)
/ IPv4 (Priority)
Switching
IPv6
(Exclusive)
IPv4
(Priority)
If this bit is “0”, only IPv6 accessing is
permitted.
If this bit is “1” and IPv4 is enabled, the
machine uses IPv4 accessing. If this
bit is “1” and IPv4 is disabled, the
machine uses IPv6 accessing. In this
case, it is unable to access through
Smart Operation Panel if IPv4 address
is enabled.
bit 3 Remote UI
Function
Not Used Use Sets use of Remote UI for scanner
function.
bit 4 Reserved - - -
bit 5 Reserved - - -
bit 6 Reserved - - -
bit 7 Reserved - - -
1042 [Scan To Email Sender Address]
1-042-001 0: Pursuant to the language setting (Default)
1: MM/DD/YYYY
2: DD/MM/YYYY
3: YYYY/MM/DD
*CTL [0 to 3 / 0 / 1 /step]
Specify the format to display the date when sending files by Scan To Email.
1043 [Result Screen Doc Name Display]
1-043-001 0: NoDisplay
1: Display
*CTL [0 to 1 / 0 / 1 /step]
Specify whether or not to display the document name (for security purposes) on the
screen
displaying the Scan To Email transmission result.
3.12.2 SP2-XXX (SCANNING-IMAGE QUALITY)
2021 [Compression Level(Grayscale)]
Selects the compression ratio for grayscale processing mode (JPEG) for the five
settings that can be selected at the operation panel.
2-021-001 Comp1:5-95 *CTL [5 to 95 / 20 / 1 /step ]
2-021-002 Comp2:5-95 *CTL [5 to 95 / 40 / 1 /step ]