"Remote Panel Operation" Settings
SM 2-59 D0CA/D0C9/D0C8/D0CB
2. Click [Device Management] > [Remote Panel Operation]
Notes
• When connected by the Remote Panel Operation function, the machine does not
automatically switch to Sleep mode, and the Auto Logout and System Auto Reset functions
do not operate.
• You cannot connect to a single unit from multiple computers and operate it by the Remote
Panel Operation function.
• The Remote Panel Operation function is supported by Internet Explorer 11 and later
versions, Google Chrome 62 and later versions, Firefox 56 and later versions, and
Microsoft Edge 40 and later versions.
About the Settings
• This function has been preinstalled. (Its icon does not appear on the operation panel.)
• For security reasons, the settings have not been specified by default. Enable or disable
each setting according to the customer’s request.
2.10.2 HOW TO ENABLE/DISABLE REMOTE PANEL
OPERATION/MONITORING
1. Enable machine administrator authentication and login as administrator.
2. Press the "Settings" icon on the Home screen.
3. Press [System Settings].
4. Press [Settings for Administrator] > [Remote Panel Operation].
5. Select [Active] or [Inactive] for "Remote Operation/Monitoring”.
• “Remote Operation/Monitoring” Functions is disabled by default. When it is disabled,
Remote Panel Operation is not displayed in the Web Image Monitor.