SMC List Card Save Function
SM 5-51 D0CA/D0C9/D0C8/D0CB
Maintenance
• A folder named by the machine serial number will be created on the SD card when this
function is executed.
• This function can save the SMC list data only to an SD card inserted into the operation
panel SD card slot.
5.11.4 ERROR MESSAGES
SMC List Card Save error message:
• Failed:
FACTOR: Read-only file system, No space left on device.
If an error occurs, pressing “Exit” will cause the device to discard the job and return to the ready
state.
To Next Page
Loading...
