SP8-XXX (Data Log2)
SM Appendices
3-331 D0CA/D0C9/D0C8/D0CB
SP Mode Tables
3.10 SP8-XXX (DATA LOG2)
3.10.1 OVERVIEW
Many of these counters are provided for features that are currently not available, such as
sending color faxes, and so on. However, here are some Group 8 codes that when used in
combination with others, can provide useful information.
SP Numbers What They Do
SP8-211 to SP8-216 The number of pages scanned to the document server.
SP8-401 to SP8-406 The number of pages printed from the document server.
SP8-691 to SP8-696 The number of pages sent from the document server.
Specifically, the following questions can be answered:
• How is the document server actually being used?
• What application is using the document server most frequently?
• What data in the document server is being reused?
Most of the SPs in this group are prefixed with a letter that indicates the mode of operation (the
mode of operation is referred to as an "application"). Before reading the Group 8 Service Table,
make sure that you understand what these prefixes mean.
Prefixes What it means
T: Total: (Grand Total). Grand total of the items counted for all applications (C, F, P,
etc.).
C: Copy application.
Totals (pages, jobs, etc.) executed for each application when the
job was not stored on the document server.
F: Fax application.
P: Print application.
S: Scan application.
L: Local storage
(document server)
Totals (jobs, pages, etc.) for the document server. The L:
counters work differently case by case. Sometimes, they count
jobs/pages stored on the document server; this can be in
document server mode (from the document server window), or
from another mode, such as from a printer driver or by pressing
the Store File button in the Copy mode window. Sometimes,
they include occasions when the user uses a file that is already
on the document server. Each counter will be discussed case by
case.
O: Other applications
(external network
applications, for
example)
Refers to network applications such as Web Image Monitor.
Utilities developed with the SDK (Software Development Kit) will
also be counted with this group in the future.
The Group 8 SP codes are limited to 17 characters, forced by the necessity of displaying them
To Next Page
Loading...
