"Web Help Support" Settings
D0CA/D0C9/D0C8/D0CB 2-52 SM
2.8.2 HOW TO ENABLE/DISABLE WEB HELP SUPPORT
This function is enabled by default. If the customer does not want to use this function, it can be
disabled via UP or SP modes as follows:
UP setting
1. Enable machine administrator authentication and login as administrator.
2. Press "Settings" icon.
3. Press [System Settings].
4. Press [Machine] > [Others] > [Support Settings].
5. Select [On] or [Off] for "Help Functions".
SP setting
1. Log in to Screen SP mode.
2. Select "Screen Device Settings".
3. Select "Application Settings".
4. Select "Settings" for “Support Settings”.
To Next Page
Loading...
