System Maintenance
D0CA/D0C9/D0C8/D0CB 8-54 SM
2. Select [Install from Server].
3. Enter the product key and press [Execute].
4. Follow the instructions shown on the screen.
• An application cannot be installed unless it is digitally signed by Ricoh.
Log in to the control panel’s service mode.
1. Select [Apps] > [Install].
2. Select [Activate Applications].
3. Select the application to be activated, and then enter the activation key and press
[Execute].
4. Follow the instructions shown on the screen.
• Only charged applications have to be activated.
Log in to the control panel’s service mode.
1. Select [Apps] > [Install].
2. Select [Update Applications].
3. Select the application to be updated, and then press [Check Update Status].
To Next Page
Loading...
