Troubleshooting for Other Problems
SM 6-155 D0CA/D0C9/D0C8/D0CB
IM C400series
6.13.2 WHEN FLUORESCENT OR LED LAMPS FLICKER
Problem:
Under the usage environment of this machine, at the placement location, fluorescent and/or
LED lamps flicker.
Causes:
This is a result of the voltage drop that occurs when power is applied to the fusing lamp. It
depends on the electrical power environment at the customer's location.
Solutions:
The procedure varies by the flicker occurrence timing. So check the occurrence timing, and do
the procedure that matches the timing.
Occurrence Timing:
To Next Page
Loading...
