Updating JavaVM
SM 5-43 D0CA/D0C9/D0C8/D0CB
Maintenance
reader/writer of the PC.
10. Insert VM Card Type M37 into SD Card Slot 2 (Lower slot) of the machine.
5.8.4 ACTIVATING SDK APPLICATIONS
1. Make sure that the VM card is fully inserted, and then turn the main power ON.
2. Log in as the machine administrator from Operation panel / Web Image Monitor.
3. Set "Auto Start" whose status is "OFF" to "On".
4. Compare the current heap size settings and the values recorded before update.
If the settings are not the same as the recorded values, correct the settings to the recorded
values.
5. Enable the disabled SDK application.
To Next Page
Loading...
