Ricoh IM C400F

System Maintenance
SM 8-31 D0CA/D0C9/D0C8/D0CB
Smart
Operation
Panel
Device
Menu level Description
1st level 2nd level 3rd level
Storage &
USB
Internal
storage
Used and Tot al
Storage Capacity
Displays the used size and total size of the
internal storage.
SD CARD
*1
Used and Tota l SD
Card Capacity
Safely Remove
Hardware icon (
)
Displays the used size and total size of the SD
card.
*To remove the SD card, click the
or
icon instead of the Safely Remove Hardware
icon (
).
USB
STORAGE
*2
Used and Tot al
USB Storage
Capacity
Safely Remove
Hardware icon (
)
Displays the used size and total size of the
USB stroage device.
*To remove the USB flash drive, click the
or
icon instead of the Safely Remove
Hardware icon (
).
Apps Install Install from SD
Card
Install or update applications from an SD card.
Install from Server Enter a product key to install or update
applications from the server.
Application Site Start up Application Site.
Activate
Applications
Activate applications that have been installed
from the server.
Update
Applications
Update applications that have been installed.
Uninstall Uninstall applications.
Install From
Internal Storage
Install applications from internal storage.
Check Server
Connect
Check if you can connect to the Server.
Firmware update Update the firmware from the SD card set in
the operation panel slot. If the SD card is not
inserted, an error message is displayed.
*1 Displayed only when an SD card is inserted into the SD card slot of the operation panel.
*2 Displayed only when an USB storage device is inserted into the USB slot of the operation
panel.