Network Settings
D0CA/D0C9/D0C8/D0CB 2-40 SM
2.6 NETWORK SETTINGS
2.6.1 SPECIFYING NETWORK SETTINGS ACCORDING TO
CUSTOMER'S ENVIRONMENT
Check the customer’s network environment and specify network settings
according to the functions to be used (such as a scanner, printer, and
Document Server setting).
1. Press the "Settings" icon.
2. Press [System Settings] > [Network/Interface].
3. Configure the required settings in [Network/Interface].
For the settings to be specified, see the user manual.
Check whether a network connection between the machine and the client
computer has been established.
1. Press the "Settings" icon.
2. Press [System Settings] > [Network/Interface] > [Ping Command].
3. Enter the client PC's IP address and press [Ping Command].
After confirming the communication, the result is displayed.
To Next Page
Loading...
