Card Save Function
D0CA/D0C9/D0C8/D0CB 5-72 SM
5.15.3 ERROR MESSAGES
Card Save error messages:
• Init error: A card save process (e.g. card detection, change to kernel mode) failed to
initialize.
• Card not found: Card cannot be detected in the slot.
• No memory: Insufficient working memory to process the job.
• Write error: Failed to write to the card.
• Other error: An unknown error occurred.
If an error occurs, pressing [OK] will cause the device to discard the job and return to the ready
state.
To Next Page
Loading...
