Ricoh IM C400F

System Maintenance
D0CA/D0C9/D0C8/D0CB 8-48 SM
8.3.5 RECOVERY MODE
The recovery mode menu is as follows. Ask your manager for details on how to enter Recovery
mode.
Menu Description
reboot system
now
Reboots the Android OS.
apply update from
sdcard
Updates the Cheetah System firmware by specifying the folder path.
wipe data/factory
reset
Deletes all installed applications and all settings on the Cheetah.
wipe cache
partition
Deletes all data that is stored on the cache partition. Currently, Cheetah does
not use the cache partition, so nothing happens when this menu item is
accessed.
wipe free area
partition
Deletes all data that is stored on the free partition. Cheetah stores the version
history on the free partition. When this menu item is selected, it will then
disappear.
wipe LegacyUI
area
Deletes Legacy UI.
micon update
from sdcard
Updates Keymicon by specifying the folder path.
view recovery
logs
Displays the recovery log.
• If [Settings] > [System Settings] > [Settings for Administrator] > [Security] > [Extended
Security Settings] > [Update Firmware] is set to [Prohibit], the control panel cannot
enter the recovery mode.
• Ask your manager for information on how to enter the recovery Mode.
8.3.6 SPECIAL KEY COMBINATIONS
Function Operation for Smart Operation Panel
Resetting Settings In the Settings screen, press a Settings category while holding
down the EX3 key.
Available for: System Settings, Copier/Document Server Settings,
and Scanner Settings.
System Reset Hold down the EX3 key and [#] simultaneously for 10 seconds.
Resets the controller software of the main machine.
Application Reset Hold down the EX3 key and [9] simultaneously for 10 seconds.