Network Settings
SM 2-41 D0CA/D0C9/D0C8/D0CB
2.6.2 SETTINGS ON DISPLAYING AN ALERT WHEN THE
ETHERNET CABLE IS BROKEN OR DISCONNECTED
Display an alert if the Ethernet cable is disconnected while operating the machine.
By default, this setting is set to [OFF] and the interval to display the alert is set to 10 minutes.
Specify the setting according to the customer’s request. If the customer does not want to
connect the machine to the network, set this to [OFF].
1. Press the "Settings" icon.
2. Press [System Settings] > [Network/Interface] > [Unconnected Network Instruction
Screen].
3. Set this value to [Display].
To Next Page
Loading...
