System Maintenance
D0CA/D0C9/D0C8/D0CB 8-28 SM
• To exit the soft keys, press [EXIT] on the screen.
Login Status Indicator
When you log in to the control panel’s service mode, the Screen Features Settings screen is
displayed.
• “Service” is displayed in the login information area [A].
• [Logout] is displayed in the Login key area [B] to allow logout from the service mode.
Logout
Press [Logout] to log out from the control panel’s service mode.
• You need to logout manually because the Auto Logout function does not work.
Depending on the authentication settings of the MF P, the following screen is displayed after you
log out.
To Next Page
Loading...
