Fax Option Type M41 (D0CK02)
D0CK 8 SM
17. Plug in the machine and turn the main power ON.
• After you turn the machine on, if you see a message that tells you that the SRAM has
been formatted due to a problem with SRAM, turn the machine off and on again to clear
the message.
18. Set date and time.
"Settings" icon > [System settings] > [Date/Time/Timer]
19. Do SP3-102-000 in the fax SP mode and enter the serial number for the fax unit.
20. Enter the correct country code with SP2-103-001 (NCU Country/ Area Code Setting).
21. Exit the SP mode, and cycle the main power off and on.
To Next Page
Loading...
